|
Do it yourself
| |||
| ||||
How to replace the front bumper of the Hyundai Santa Fe MK3.
Model: Hyundai Santa Fe
MK 3
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Let's see how to replace the front bumper of a Hyundai Santa Fe MK3: open the hood and from the top remove the two push clips, then unscrew the 4 bolts (10 mm) from the panel above the radiator. Remove the screw located at the bumper/fender corner, and the two push clips inside each wheel arch. Disconnect the fog lights by reaching the connector from behind the bumper, then pull the corners of the bumper outward to release the clips, and carefully slide it forward. Transfer the components (headlights and trims) from the old bumper to the new one. For reassembly, first engage the guides under the headlights, then push the clips evenly until they snap into place. Reconnect and re-screw everything. The plastic clips break easily, so it's a good idea to have a handful of spares on hand before starting the work.
Posted on 30 December 2025 by ScegliAuto
Related tutorials
Hyundai Santa Fe
(2012-2018 /
MK 3)
To remove the front headlamp of the Hyundai Santa Fe, loosen all the screws that secure the front bumper to its housing: these screws are located at …
Hyundai Santa Fe
(2012-2018 /
MK 3)
Let's look at removing the front bumper on a Hyundai Tucson. Lift the front bonnet of the car and locate the screws to be removed. Remove the fasteni…
Hyundai Santa Fe
(2000-2006 /
MK 1)
This guide outlines the steps to remove and replace the air conditioning radiator on a Hyundai Santa Fe, following the instructions below. First, ope…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
