Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Headlight

To remove the front headlamp of the Hyundai Santa Fe, loosen all the screws that secure the front bumper to its housing: these screws are located at the upper central part of the bumper, the lower central part, and inside the wheel arches of the front wheels. Once all securing screws are loosened, it will be possible to completely detach the bumper and locate the screws that secure the front headlamp: these must also be loosened, allowing you to pull the headlamp from its housing and disconnect its connector at the rear.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlight Bulbs on Hyundai Santa Fe
Removing Front Headlight Bulbs on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Remove the front headlight bulbs on a Hyundai Santa Fe. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the…
How to replace the front headlight bulb of the Hyundai Santa Fe.
How to replace the front headlight bulb of the Hyundai Santa Fe.
Hyundai Santa Fe (2012-2018 / MK 3) Below we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Hyundai Santa Fe. First, let's open the ve…
How to Replace Headlight Bulbs on a Hyundai Santa Fe
How to Replace Headlight Bulbs on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Need to replace damaged bulbs on a Hyundai Santa Fe? Let’s see how to do it. Open the bonnet by pulling the lever located at the bottom right of the …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos