Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Left Front Headlamp on Hyundai Santa Fe

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Headlight

To remove the headlamp, open the bonnet and use a ratchet spanner to unscrew the two fixing bolts located at the sides of the headlamp. Once done, gently pull the headlamp outwards (be careful to avoid breaking the pins during this step). Now, disconnect the connector and work on the bulbs (or replace the entire headlamp); after this, proceed to refit the piece, ensuring to reconnect the wiring connector first. Once the headlamp is in place, re-tighten the rear screws and you are finished.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlight Bulbs on Hyundai Santa Fe
Removing Front Headlight Bulbs on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Remove the front headlight bulbs on a Hyundai Santa Fe. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the…
Removing the Headlights from a 2016 Hyundai Santa Fe
Removing the Headlights from a 2016 Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) To replace the headlight unit on the Hyundai Santa Fe, start by placing the car on a ramp or flat surface for safe and stable working. Now, open the …
What is the Fuse Diagram for a Hyundai Santa Fe?
What is the Fuse Diagram for a Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) Fuses are electrical components that protect the electrical circuit of your Hyundai Santa Fe from voltage overloads or short circuits. They are prima…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos