Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Hyundai Santa Fe.

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Hyundai Santa Fe. First, let's open the vehicle's hood and begin by removing the plastic protective cap for the bulbs; then we disconnect the electrical connector of the light and unclip the metal spring to remove the bulb from the headlight assembly, as shown in the video.

At this point, we replace and install the new low beam or high beam bulb, ensuring it is the correct type and has the same fitting; we check that it works properly and finally secure the plastic cap.


Posted on 18 December 2025 by ScegliAuto


Related tutorials

Removing Front Headlight Bulbs on Hyundai Santa Fe
Removing Front Headlight Bulbs on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Remove the front headlight bulbs on a Hyundai Santa Fe. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the…
How to Replace Headlight Bulbs on a Hyundai Santa Fe
How to Replace Headlight Bulbs on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Need to replace damaged bulbs on a Hyundai Santa Fe? Let’s see how to do it. Open the bonnet by pulling the lever located at the bottom right of the …
Front Headlight Replacement
Front Headlight Replacement
Hyundai Santa Fe (2006-2012 / MK 2) This video illustrates how to replace the front headlight of a Hyundai Santa Fe. Start by opening the bonnet. If you have the Santa Fe manual, refer …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos