Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the high beam bulbs in the Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Headlight bulb

In this tutorial we can see how to replace the high beam bulbs in the Hyundai Santa Fe, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the hood, locate the cap located on the rear inner area of the headlight in question and remove it. Next, disconnect the power connector, release the metal clip and remove the old bulb from the housing. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 1 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fog light bulbs in the Hyundai Santa Fe?
How to replace the fog light bulbs in the Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) In this tutorial, we can see how to replace the fog light bulbs in the Hyundai Santa Fe, a very simple and quick operation. First of all, make sure t…
How to Replace Headlight Bulbs on a Hyundai Santa Fe
How to Replace Headlight Bulbs on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Need to replace damaged bulbs on a Hyundai Santa Fe? Let’s see how to do it. Open the bonnet by pulling the lever located at the bottom right of the …
Replacement of Rear Light Bulbs
Replacement of Rear Light Bulbs
Hyundai Santa Fe (2006-2012 / MK 2) This tutorial explains how to replace the brake and indicator light bulbs on a Hyundai Santa Fe. First, open the boot; using the tip of a screwdriver…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos