Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Headlight

Hyundai Santa Fe - Headlight

Hyundai Santa Fe (2012-2018 / MK 3)
How do you remove the front headlight of the Hyundai Santa Fe?
In order to remove the front headlight of the Hyundai Santa Fe, you need to loosen all the screws that secure the front bumper to its housing: these screws are …read all…
Posted on 18 November 2023 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
Remove the headlights of the Hyundai Santa Fe 2016.
To replace the headlight block of the Hyundai Santa Fe, we begin by placing the car on the deck or on a floor, so that we can work on it with safety and …read all…
Posted on 24 December 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
Hiundai Santa Fe left front headlight removal
To remove the headlight, open the bonnet and use a ratchet wrench to unscrew the two fixing bolts located on the sides of the headlight. Once this has been …read all…
Posted on 15 December 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
Front headlight disassembly instructions
Removing the headlight is a very simple operation to perform, above all because you will not have to remove any other element such as the bumper; therefore, …read all…
Posted on 5 September 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Disassembly and replacement of headlights
If you need to replace one or both of the headlights because they are damaged or not very bright, because the transparent plastic has become opaque, proceed as …read all…
Posted on 22 July 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacing the headlight bulb with disassembly of the same
For this operation you need a ratchet wrench. Open the bonnet and unscrew the headlight retaining screws. Gently remove the headlight paying attention to the …read all…
Posted on 12 July 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
Headlight replacement
The video illustrates how to replace the headlight of the Hyunday Santa Fe. Start by opening the front hood. If you have the manual of the Santa Fe, in section …read all…
Posted on 2 July 2023 by ScegliAuto
Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos