Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : Timing belt

Hyundai Santa Fe - Timing belt

Hyundai Santa Fe (2006-2012 / MK 2)
How do you replace the timing chain of the Hyundai Santa Fe?

The operation of replacing the Hyundai Santa Fe's timing chain involves opening the hood to gain access to the components located inside the engine block: …read all…
Posted on 1 September 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
How do you replace the timing chain on your Hyundai Santa Fe?

The replacement of the timing chain on the Hyundai Santa Fe is carried out by extracting the car engine from its housing compartment, so as to be able to act …read all…
Posted on 5 December 2022 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the timing chain on Hyundai Santa Fe

Replacing the timing belt of a car is a rather complex operation, so let's try to summarize the main steps to be carried out below: first lift the car, remove …read all…
Posted on 9 May 2024 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the timing chain of the Hyundai Santa Fe?

In order to replace the Hyundai Santa Fe timing chain it is convenient to remove the car engine from its housing compartment, in order to be able to operate …read all…
Posted on 14 March 2024 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
When to replace the timing belt on the Santa Fe

The timing belt is an absolutely vital element for the operation of the vehicle. The belt depends on delicate and complex parts including the water pump and …read all…
Posted on 14 December 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replace the timing belt of the Hyundai Santa Fe

Changing the belt is a delicate job, it should be done with a minimum of experience. Anyway, here are the tips to replace the distribution of the Hyundai Santa …read all…
Posted on 13 November 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
When is it necessary to replace the timing belt of the Hyundai Santa Fe?

The timing belt of the Hyundai Santa Fe should be replaced, according to what is written in the instruction manual, every 160,000km. This does not mean that …read all…
Posted on 16 September 2023 by ScegliAuto

Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos