Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : Air filter

Hyundai Santa Fe - Air filter

Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the air filter on Hyundai Santa Fe

To replace the air filter of the Hyundai Santa Fe we start by opening the engine hood, we release the tabs that hold the cover of the air filter box, we open …read all…
Posted on 29 April 2024 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
How to remove and replace the engine air filter on a Hyundai Santa Fe

Let's see how to remove and replace the engine air filter on a Hyundai Santa Fe. We open the car door, pull up the engine compartment opening lever located at …read all…
Posted on 17 November 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
How to change the air filter on Hyundai Santa FE

Keeping the engine air filter clean and efficient is certainly essential so that the right amount of air can always be drawn in, to the benefit of both …read all…
Posted on 11 October 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Engine air filter replacement

To replace the engine air filter, open the front hood by pulling the lever at the bottom left on the driver's side and press the safety lock on the lock …read all…
Posted on 25 August 2023 by ScegliAuto

Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos