Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Hyundai Santa Fe - Valve

Valve Hyundai Santa Fe (2006-2012 / mk 2)

Hyundai Santa Fe (2006-2012 / MK 2)
Cleaning and Checking the Engine Valve
Engine valves reduce nitrogen oxide emissions. This valve uses the gas temperatures to quickly heat the combustion chamber and prevent it from becoming too hot …Read all…
Posted on 24 February 2026 by ScegliAuto
Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (20) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (14) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) Tire pressure warning light (5) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos