Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Windscreen wipers

Hyundai Santa Fe - Windscreen wipers

Hyundai Santa Fe (2006-2012 / MK 2)
How to replace the rear wiper blade on Hyundai Santa Fe?
In order to replace the upper wiper blade, you have to lift the rotating arm and act on the pin that holds the blade fixed to the arm. By rotating it 90Â ° …read all…
Posted on 7 March 2024 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Disassembling the washer pump on Hyundai Santa Fe
How to do the disassembly of the washer pump on Hyundai? Let's disassemble the faulty pump, broken by the Santa Fe's stone guard, let's see. We unscrew the …read all…
Posted on 19 December 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
How to replace the windshield wiper blade on a Hyundai Santa Fe
Let's see in this video how to replace the rear wiper blade of a Hyundai Santa FÃ © car. We grab the rear brush with our hands, pull the movable brush as in …read all…
Posted on 4 October 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacement wiper blades
The replacement of the wiper blades is very simple to carry out and does not require any type of equipment; therefore start from the choice of quality brushes …read all…
Posted on 26 August 2023 by ScegliAuto
Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos