Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to replace the windshield wiper blade on a Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Windscreen wipers
Operation: How to replace the windshield wiper blade on a Hyundai Santa Fe

Let's see in this video how to replace the rear wiper blade of a Hyundai Santa FÃ © car. We grab the rear brush with our hands, pull the movable brush as in the video (gently without breaking it) and slide it off the arm on the left. We mount the new brush on the arm (if the brush is not original we have to detach the piece as in the video), we will hear a tack of successful engagement. Finally we lower the wiper arm onto the windshield and test the new mounted blade. It is always preferable to mount original parts for a longer duration and superior quality.


Posted on 4 October 2023 by ScegliAuto



How to replace the rear wiper blade on Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In order to replace the upper wiper blade, you have to lift the rotating arm and act on the pin that holds the blade fixed to the arm. By rotating it
Disassembling the washer pump on Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) How to do the disassembly of the washer pump on Hyundai? Let's disassemble the faulty pump, broken by the Santa Fe's stone guard, let's see. We unscr
Where is the fuse box located in the 2007 Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) If you want to locate the box containing all the fuses of your 2007 Hyundai Santa Fe, you must follow the various steps described in this new guide d

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos