Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen Washer Pump on Hyundai Santa Fe

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Windshield wipers

See other generations:
Video tutorial

How to remove the windscreen washer pump on a Hyundai? Remove the faulty pump from inside the wheel arch of the Santa Fe. Unscrew the pins located on the sides of the wheel arch above the front right wheel. Remove the cover under the wheel arch.

Take off the wiper pump and disconnect the water hoses and power cables. Connect the new pump to the various hoses and power cables.

Before reassembling everything, test the pump to ensure it works correctly. Secure the pump to the container wall, cover the access with the cover, and screw in the securing screws.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump on the Hyundai Santa Fe
How to Replace the Windscreen Washer Pump on the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Today, we will discover the instructions to remove and replace the windscreen washer pump on the Hyundai Santa Fe. First, lift the vehicle and start …
How to Replace the Fuel Level Sender in a Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) To replace the fuel level sender inside the tank of a Hyundai Santa Fe, you need to completely remove the rear seats by unscrewing the bolts that sec…
How to Reset the Service Light of the Hyundai Santa Fe
How to Reset the Service Light of the Hyundai Santa Fe
Hyundai Santa Fe (2019-2023 / TM, MK 4) By following the steps in this guide, you will be able to complete the manual reset of the service light on your Hyundai Santa Fe in just a few secon…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos