Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windscreen Washer Pump on the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Pump

See other generations:
Video tutorial

Today, we will discover the instructions to remove and replace the windscreen washer pump on the Hyundai Santa Fe. First, lift the vehicle and start removing the lower plastic cover on the right, gaining access to the washer fluid reservoir and the pump.

Disconnect the hose and the electrical connector, thus removing the windscreen washer pump, as shown in the video.

Now, install the new original windscreen washer pump, connecting it properly; refill with new washer fluid and test its correct operation!


Posted on 6 October 2026 by ScegliAuto


Related tutorials

Hyundai Santa Fe (2000-2006 / MK 1) How to remove the windscreen washer pump on a Hyundai? Remove the faulty pump from inside the wheel arch of the Santa Fe. Unscrew the pins located on…
Hyundai Santa Fe (2006-2012 / MK 2) To replace the fuel level sender inside the tank of a Hyundai Santa Fe, you need to completely remove the rear seats by unscrewing the bolts that sec…
Hyundai Santa Fe (2012-2018 / MK 3) In this tutorial, we will see how to replace the air filter in the Hyundai Santa Fe, a very simple and quick operation. First, ensure that the engine…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Air Conditioner on the Mercedes E-Class?

To reset the air conditioner on the Mercedes E-Class, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press and hold the REST and 0 buttons located on the center panel of the dashboard. While holding these buttons, you will notice that the air conditioning settings will be restored to their default values. After the reset procedure is complete, you can turn off the ignition again by turning the key.

Watch the video!


by ScegliAuto

More videos