Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : -board computer

Hyundai Santa Fe - -board computer

Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the service light on the Hyundai Santa Fe

In this article we will see the procedure to reset the maintenance light of the Hyundai Santa Fe, in case it remains on after having the car serviced. To do …read all…
Posted on 11 March 2024 by ScegliAuto
Hyundai Santa Fe (2019-2024 / TM, MK 4)
How to reset the oil life on a Hyundai Santa Fe.

In this video tutorial, we can see how it is possible to reset the oil duration in a Hyundai Santa Fe by following some simple steps: the first thing to do is …read all…
Posted on 12 September 2023 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the oil change light on hyundai santafe

To reset the service light on Hyundai Santa Fe, follow this procedure: when the service light comes on, the first thing to do will be to change the engine oil …read all…
Posted on 21 December 2022 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the radio in Hyundai Santa Fe

In this video we will show you how to reset the radio in your Hyundai Santa Fe. Resetting the radio of this model is a very simple operation. You just have to …read all…
Posted on 21 November 2022 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to reset the Hyundai Santa Fe maintenance warning light

In order to manually reset the maintenance warning light on your Hyundai Santa Fe Mk3 there is no need to rely on a professional in the sector, but you just …read all…
Posted on 7 May 2024 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Airbag fault warning light reset

If the airbg fault warning light remains on on the instrument panel, then it is absolutely necessary to have a diagnostic tool, even of a generic type, to read …read all…
Posted on 29 August 2023 by ScegliAuto

Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos