Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Brake rotors

Hyundai Santa Fe - Brake rotors

Brake Rotors Hyundai Santa Fe (2000-2006 / mk 1)

Hyundai Santa Fe (2000-2006 / MK 1)
Replacement of Rear Brake Discs
Dirt infiltration between the pads and discs can irreparably damage them, so they need to be replaced. Start by removing the brake caliper using a ratchet …Read all…
Posted on 10 February 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacing Rear Brake Discs and Brake Pads
Lift the vehicle on suitable car stands and remove the wheel. Then unscrew the fixing screws of the disc to the hub and, before removing it, dismantle the …Read all…
Posted on 9 February 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacement of Front Brake Discs and Pads
Dirt infiltration between the pads and discs can irreparably damage them, so replacement is necessary. Remove the brake caliper using a ratchet spanner by …Read all…
Posted on 6 February 2026 by ScegliAuto
Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (18) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (13) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) (4) Tire pressure warning light (1) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos