Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Brake pads

Hyundai Santa Fe - Brake pads

Hyundai Santa Fe (2000-2006 / MK 1)
Replacing the brake pads on a Hyundai Santa Fe
Replacing the front brake pads? We see the teardown on a Hyundai Santa Fe. We lift the car on a column bridge to the desired height, remove the wheel with the …read all…
Posted on 10 December 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
Replacement of front brake pads
Place the car on suitable car stands and remove the front wheel; lever between the disc and the pads to retract the pistons and facilitate disassembly; unscrew …read all…
Posted on 19 August 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacement of front brake pads
Raising the car to replace the brake pads will make the operation much easier and more comfortable to perform; once raised, remove the front wheel and the pins …read all…
Posted on 11 August 2023 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacement of rear brake pads
Raise the car on a lift and remove the rear wheel; then disassemble the fixing pins of the brake calliper and remove it from the support; remove the old pads; …read all…
Posted on 23 July 2023 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
Replacement of front brake pads
Loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel. With the help of a screwdriver and hammer push out the two stops …read all…
Posted on 15 July 2023 by ScegliAuto
Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos