Do it yourself
Frequently asked questions about cars and motorcycles

Hyundai Santa Fe - Key

Hyundai Santa Fe (2019-2024 / TM, MK 4)
How to replace the battery of the Hyundai Santa Fe remote control?

In this tutorial, we can see how to replace the battery of the Hyundai Santa Fe remote control, a very simple and quick operation. To do this, we will need a …read all…
Posted on 20 April 2024 by ScegliAuto
Hyundai Santa Fe (2019-2024 / TM, MK 4)
How to replace the battery of the Hyundai Santa Fe 4 key

If you want to replace the button battery inside the smart key of your Hyundai Santa Fe Mk4 (year 2019-2023) by yourself, all you have to do is carefully read …read all…
Posted on 20 February 2024 by ScegliAuto
Hyundai Santa Fe (2019-2024 / TM, MK 4)
How to change the key battery in a hyundai santafe

Through this very short and simple video tutorial, we can see all the steps necessary to replace the battery (CR2032) in the key of a Hyundai Santa Fe, …read all…
Posted on 30 April 2023 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the remote control battery of Hyundai Santa Fe?

Replacing the remote control battery of the Hyundai Santa Fe is very simple, let's see how to proceed in this tutorial. We need a small flat-tip screwdriver …read all…
Posted on 15 August 2022 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
Replacing the key shell on the Hyundai Santa Fe MK3 - I20

In this video tutorial we will discover the step by step instructions to remove and replace the key shell on the Hyundai Santa Fe third series, but also on the …read all…
Posted on 3 March 2024 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the battery on Hyundai Santa Fe

How to replace the battery located in the remote control key of a Hyundai Santa Fe? We take our ignition remote control and extract the metal key; once the …read all…
Posted on 7 November 2023 by ScegliAuto

Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos