Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery of a Hyundai Santa Fe

Model: Hyundai Santa Fe TM, MK 4 - Years: 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

This brief and simple video tutorial shows all the necessary steps to replace the battery (CR2032) of a Hyundai Santa Fe key, specifically the model produced from 2018 to 2020. First, press the release button of the physical key to remove it from its housing.

Next, insert a small flathead screwdriver between the base of the key and the rear cover, and twist it to lever off the cover as shown in the video.

Once done, use a small crosshead screwdriver to remove the two screws from the battery cover, allowing you to replace it with a new one.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to replace the key battery of a Hyundai Santa Fe?
How to replace the key battery of a Hyundai Santa Fe?
Hyundai Santa Fe (2019-2023 / TM, MK 4) The remote control for the Hyundai Santa Fe operates on energy supplied by a 3-volt button cell battery, identifiable by the CR2032 marking on it, an…
How to Replace the Key Battery of the Hyundai Santa Fe
How to Replace the Key Battery of the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) If the key of your Hyundai Santa Fe (2013-2018) no longer works due to a completely dead battery, carefully read the following guide and follow the d…
How to Replace the Battery in a Hyundai Santa Fe Key Fob
How to Replace the Battery in a Hyundai Santa Fe Key Fob
Hyundai Santa Fe (2012-2018 / MK 3) How do you replace the battery in the key fob of a Hyundai Santa Fe? Take your key fob and remove the metal key; once the metal key is out, insert it…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos