Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Key Shell Replacement on Hyundai Santa Fe MK3 - I20

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

In this video tutorial, discover step-by-step instructions to dismantle and replace the key shell on the Hyundai Santa Fe third generation, as well as the I20. First, take your remote control and pry it open from the sides to separate it into two parts; then remove the electronic board, the key, and the transponder, as shown in the video.

At this point, transfer all components into the new remote shell; then correctly assemble all components, especially the electronic board and the transponder, following the video to the end!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Disassembly and replacement of the key shell of the Hyundai Santa Fe
Disassembly and replacement of the key shell of the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Today we will see the instructions that will allow us to disassemble and replace the shell of the Hyundai Santa Fe key. First of all, we take our rem…
How to Replace the Key Fob Battery on a Hyundai Santa Fe
How to Replace the Key Fob Battery on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) How to replace the battery in the remote key fob of a Hyundai Santa Fe? Follow this detailed video guide. Take your remote key fob, and using a screw…
How to Replace the Air Filter in the Hyundai Santa Fe
How to Replace the Air Filter in the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) To replace the air filter in the Hyundai Santa Fe, start by opening the bonnet, unclip the tabs holding the air filter box cover, open it, and move i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos