Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the key shell of the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the shell of the Hyundai Santa Fe key. First of all, we take our remote control and start by removing the physical key from inside it; then we remove the plastic cover and lever open the remote control in two parts, as shown in the video.

At this point, we remove the battery and the electronic board, also removing the transponder; we transfer all the components to the new key shell, respecting the assembly order, following the video tutorial until the end!


Posted on 23 December 2024 by ScegliAuto


Related tutorials

Key Shell Replacement on Hyundai Santa Fe MK3 - I20
Key Shell Replacement on Hyundai Santa Fe MK3 - I20
Hyundai Santa Fe (2012-2018 / MK 3) In this video tutorial, discover step-by-step instructions to dismantle and replace the key shell on the Hyundai Santa Fe third generation, as well a…
Guide to Removing the Alternator from the Hyundai Santa Fe V6
Hyundai Santa Fe (2006-2012 / MK 2) Today's guide will show you the procedure for removing and replacing the alternator of the Hyundai Santa Fe, following the instructions below. First,…
Removing the Front Seat on a Hyundai Santa Fe
Removing the Front Seat on a Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Is the seat on your Hyundai Santa Fe damaged? Here’s how to remove the front seat. Move the seat back (using the manual metal lever or electric butto…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos