Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to replace the air filter on Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Air filter
Operation: How to replace the air filter on Hyundai Santa Fe

To replace the air filter of the Hyundai Santa Fe we start by opening the engine hood, we release the tabs that hold the cover of the air filter box, we open it and move it so that the filter can come out. With the air filter removed, we take the new air filter, put it in its seat in the same way as the old air filter was positioned. Once the new air filter has been fitted, we reposition the cover of the air filter box, hook the tabs in such a way that the cover remains closed. Finally we can close the engine hood.


Posted on 29 April 2024 by ScegliAuto



How to replace the cabin air filter in Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) The cabin air filter in the Hyundai Santa Fe is located behind the glovebox. This must be emptied so that once it is open we can remove the two fixin
How to remove and replace the engine air filter on a Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Let's see how to remove and replace the engine air filter on a Hyundai Santa Fe. We open the car door, pull up the engine compartment opening lever l
Hyunday Santa Fe cabin filter replacement
Hyundai Santa Fe (2006-2012 / MK 2) In this video we are going to see how to replace the cabin air filter on the Hyundai Santa Fe SUV. The filter is located in the position of the glove

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos