Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Crankshaft RPM sensor

Hyundai Santa Fe - Crankshaft RPM sensor

Hyundai Santa Fe (2012-2018 / MK 3)
Where is the engine speed sensor located in the Hyundai Santa Fe and how to replace it?
In this video, we can see where the crankshaft position sensor is located in the Hyundai Santa Fe, and how to proceed in case we need to replace it. As shown, …read all…
Posted on 1 February 2024 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Replacement of the crankshaft sensor of the Hyundai Santa Fe 2.4L.
Today's guide will illustrate the necessary steps to disassemble and replace the crankshaft position sensor of the Hyundai Santa Fe 2.4L. First, we open the …read all…
Posted on 30 January 2024 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
Where is the crankshaft position sensor located in the Hyundai Santa Fe?
In this video, we can see where the crankshaft position sensor is located in the Hyundai Santa Fe, which is useful in case we need to replace it. As shown, it …read all…
Posted on 20 July 2023 by ScegliAuto
Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos