Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Front bumper

Hyundai Santa Fe - Front bumper

Front Bumper Hyundai Santa Fe (2012-2018 / mk 3)

Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the front bumper of the Hyundai Santa Fe MK3.
Let's see how to replace the front bumper of a Hyundai Santa Fe MK3: open the hood and from the top remove the two push clips, then unscrew the 4 bolts (10 mm) …Read all…
Posted on 30 December 2025 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
Replacing the Rear Bumper on a Hyundai Santa Fe
Let's look at removing the front bumper on a Hyundai Tucson. Lift the front bonnet of the car and locate the screws to be removed. Remove the fastening screws …Read all…
Posted on 12 May 2026 by ScegliAuto
Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (20) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (14) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) Tire pressure warning light (5) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1)

How to Reset the Tyre Pressure Light on a Cupra Formentor

In this brief and simple video tutorial, learn how to reset the tyre pressure on a Cupra Formentor. Start by pressing the ignition button to turn on the instrument cluster. Now, use the touchscreen display on the central console to open the car menu. From here, select the driving data option, then the tyre pressure option. Now, click on the "SET" button with the pressure warning symbol and confirm the correct tyre pressure required by the manufacturer to perform the reset.

Watch the video!


by ScegliAuto

More videos