Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : Diesel filter

Hyundai Santa Fe - Diesel filter

Hyundai Santa Fe (2006-2012 / MK 2)
Replacing the diesel filter on Hyundai Santa Fe

Let's see in this video tutorial how to replace the diesel filter on a Hyundai Santa Fe 2.2l 150 hp, model produced from 2007 to 2012. The filter is located, …read all…
Posted on 26 August 2022 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)
How to replace a diesel filter on Hyundai Santa Fe

How to replace the diesel filter on Hyundai Santa Fe? Let's see the replacement in this video: open the car door and pull up the engine compartment opening …read all…
Posted on 22 October 2023 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)
How to replace the Hyundai Santa Fe diesel filter

The diesel filter is located in the engine compartment, immediately under the windscreen, near the passenger side shock absorber dome; start by disconnecting …read all…
Posted on 3 September 2023 by ScegliAuto

Alternator (3) Loudspeaker (1) Shock absorbers (7) Air conditioning (2) Car stereo (3) Anti roll bar (1) Battery (4) Coil (1) Arm (5) Spark plugs (3) Glow plugs (1) Key (6) Timing belt (7) Air conditioning (1) -board computer (6) Checks and maintenance (17) Dashboard (3) Bearing (1) Brake discs (3) Headlight (7) Tail light (1) Air filter (4) Cabin air filter (11) Diesel filter (3) Oil filter (2) Window lift switch (2) Accessory Kit (2) Light bulb (1) Headlight bulb (2) Rear light bulb (1) Interior lights ceiling light bulb (1) Dashboard light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Gear oil (5) Brake oil (1) Engine oil (7) Door panel (1) Front bumper (1) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Fuel pump (2) Instrument cluster (2) Radiator (3) Wheel (1) Fuse box (5) Seat (1) Crankshaft RPM sensor (3) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (4) Valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos