|
Do it yourself
| |||
| ||||
Hyundai Santa Fe - DashboardDashboard Hyundai Santa Fe (2006-2012 / mk 2)
Hyundai Santa Fe (2000-2006 / MK 1)Instrument Cluster Bulb Replacement To replace the bulbs in the instrument cluster, you need to remove the cluster from the dashboard: start by removing the trim surrounding the instrument …Read all… Posted on 27 February 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)Replacement of Instrument Cluster Glass If the glass (actually plexiglass) in front of the instrument cluster breaks, it can be replaced as it is available in the parts line (for many car models, …Read all… Posted on 26 February 2026 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)Removing the Original Car Radio Remove the screws securing the knee pad on the driver's side to slightly move it away from its position (this is necessary to allow the removal of the central …Read all… Posted on 7 February 2026 by ScegliAuto Dashboard Hyundai Santa Fe (2000-2006 / mk 1)
Hyundai Santa Fe (2000-2006 / MK 1)Instrument Cluster Bulb Replacement To replace the bulbs in the instrument cluster, you need to remove the cluster from the dashboard: start by removing the trim surrounding the instrument …Read all… Posted on 27 February 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)Replacement of Instrument Cluster Glass If the glass (actually plexiglass) in front of the instrument cluster breaks, it can be replaced as it is available in the parts line (for many car models, …Read all… Posted on 26 February 2026 by ScegliAuto
Hyundai Santa Fe (2006-2012 / MK 2)Removing the Original Car Radio Remove the screws securing the knee pad on the driver's side to slightly move it away from its position (this is necessary to allow the removal of the central …Read all… Posted on 7 February 2026 by ScegliAuto Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (20) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (14) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) Tire pressure warning light (5) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1) |
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |