|
Do it yourself
| |||
| ||||
Instrument Cluster Bulb Replacement
Model: Hyundai Santa Fe
MK 1
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
To replace the bulbs in the instrument cluster, you need to remove the cluster from the dashboard: start by removing the trim surrounding the instrument cluster by unscrewing the two fixing screws along the rear edge; once the trim is removed, you can access the fixing screws of the instrument cluster, unscrew them, and pull the cluster forward enough to disconnect the connectors; then place the instrument cluster on a work surface and proceed by disconnecting the bulb holders and replacing the bulbs: to reach some of these, you may also need to remove the rear cover to access the electronic circuit. After replacing the bulbs, reassemble the cluster and reverse the steps for installation in the vehicle.
Updated on 18 February 2026 by ScegliAuto
Related tutorials
Hyundai Santa Fe
(2000-2006 /
MK 1)
Today's video will show you the procedure for removing and replacing the instrument cluster bulbs of the Hyundai Santa Fe. First, get inside the vehi…
Hyundai Santa Fe
(2000-2006 /
MK 1)
In this video, see how to remove and replace the climate control switch bulbs on the first series Hyundai Santa Fe in simple steps. First, get inside…
Hyundai Santa Fe
(2006-2012 /
MK 2)
Remove the front headlight bulbs on a Hyundai Santa Fe. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
