Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Instrument Cluster Bulbs of the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Instrument panel light

See other generations:
Video tutorial

Today's video will show you the procedure for removing and replacing the instrument cluster bulbs of the Hyundai Santa Fe. First, get inside the vehicle and start by removing the plastic cover of the instrument cluster; then unscrew the screws found on the sides, disconnecting the electrical connector located at the back, as shown in the video.

At this point, you can remove the small bulbs found at the back of the cluster, replacing them with new ones (having the same fitting); reassemble and test the new bulbs!


Updated on 25 September 2026 by ScegliAuto


Related tutorials

Instrument Cluster Bulb Replacement
Instrument Cluster Bulb Replacement
Hyundai Santa Fe (2000-2006 / MK 1) To replace the bulbs in the instrument cluster, you need to remove the cluster from the dashboard: start by removing the trim surrounding the instrum…
Replacing the climate control switch bulbs on the Hyundai Santa Fe Mk1
Replacing the climate control switch bulbs on the Hyundai Santa Fe Mk1
Hyundai Santa Fe (2000-2006 / MK 1) In this video, see how to remove and replace the climate control switch bulbs on the first series Hyundai Santa Fe in simple steps. First, get inside…
How to Replace Headlight Bulbs on a Hyundai Santa Fe
How to Replace Headlight Bulbs on a Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) Need to replace damaged bulbs on a Hyundai Santa Fe? Let’s see how to do it. Open the bonnet by pulling the lever located at the bottom right of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos