Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Engine air filter replacement

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Air filter
Operation: Engine air filter replacement

To replace the engine air filter, open the front hood by pulling the lever at the bottom left on the driver's side and press the safety lock on the lock immediately under the manufacturer's frieze; intercept the filter box (air box) located immediately behind the battery, near the damper dome, release the metal tabs that secure the cover, lift it and remove the old filter; remove any residual dirt inside the box, apply the new filter making sure the gasket adheres perfectly to the edges and reposition the cover, fixing it with the relative tabs.


Posted on 25 August 2023 by ScegliAuto



How to replace the air filter on Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) To replace the air filter of the Hyundai Santa Fe we start by opening the engine hood, we release the tabs that hold the cover of the air filter box,
How to change the air filter on Hyundai Santa FE
Hyundai Santa Fe (2006-2012 / MK 2) Keeping the engine air filter clean and efficient is certainly essential so that the right amount of air can always be drawn in, to the benefit of bo
How to remove and replace the engine air filter on a Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) Let's see how to remove and replace the engine air filter on a Hyundai Santa Fe. We open the car door, pull up the engine compartment opening lever l

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos