Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headlights from a 2016 Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

To replace the headlight unit on the Hyundai Santa Fe, start by placing the car on a ramp or flat surface for safe and stable working. Now, open the front bonnet of the engine compartment and, using the appropriate tool, unscrew the three bolts located at the points shown in the video, near the top edge of the headlight unit.

Next, unscrew the two bolts that secure the headlight unit underneath, at the bottom edge. Disconnect the electrical supply and gently remove the headlight unit from its housing, as illustrated in the images.

This completes the operation!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to replace the fog light bulbs in the Hyundai Santa Fe?
How to replace the fog light bulbs in the Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) In this tutorial, we can see how to replace the fog light bulbs in the Hyundai Santa Fe, a very simple and quick operation. First of all, make sure t…
How to disassemble the front headlights in the Hyundai Santa Fe?
How to disassemble the front headlights in the Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In this tutorial, we can see how to replace the front headlights in the Hyundai Santa Fe, a very simple and quick operation. First of all, make sure …
How to replace the high beam bulbs in the Hyundai Santa Fe?
How to replace the high beam bulbs in the Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In this tutorial we can see how to replace the high beam bulbs in the Hyundai Santa Fe, an extremely simple and quick operation. First of all, make s…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos