Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : How to remove the cooling radiator of the Hyundai Santa Fe.

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Radiator
Operation: How to remove the cooling radiator of the Hyundai Santa Fe.

Let's see the main instructions that will allow us to disassemble and replace the cooling radiator of the Hyundai Santa Fe. First, we open the engine hood of our car and start dismantling and removing the front bumper grille by unscrewing the screws; then we disconnect the fan from the radiator, unscrewing the screws located on the brackets and disconnecting the electrical connector, as shown in the video. At this point, we bleed the coolant by disconnecting the radiator hose; then we unscrew the fixing screws to remove it and replace it with the new one!


Posted on 14 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos