Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Today's steps will show you how to remove and replace the standard radio in the Hyundai Santa Fe, following the instructions below. First, get inside the cabin and start removing the side air vents by prying them with something thin and pointed; then, unscrew all the fixing screws found on the side of the radio, disconnecting the electrical connectors located at the back, as shown in the video.

At this point, install the new multimedia system compatible with your vehicle if necessary, applying the reverse procedure!


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Reset the Radio of the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) In this video, you will learn how to reset the radio of the Hyundai Santa Fe. Resetting the radio on this model is very simple. You only need a penci…
Removing the Car Radio from the Hyundai Santa Fe MK2
Removing the Car Radio from the Hyundai Santa Fe MK2
Hyundai Santa Fe (2006-2012 / MK 2) Discover how to remove the car radio along with the dashboard panel on the Hyundai Santa Fe second series in this video. First, get inside the vehicl…
Where is the OBD2 Port on the Hyundai Santa Fe?
Where is the OBD2 Port on the Hyundai Santa Fe?
Hyundai Santa Fe (2000-2006 / MK 1) If you own a first-generation Hyundai Santa Fe and are wondering where the OBD2 port is located for connecting to the ECU, follow the steps described…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos