Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Bumper Grille on a Volvo XC90

Model: Volvo Xc90 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

The instructions below will guide you on how to remove and replace the front bumper grille on a Volvo XC90. First, open the hood of the vehicle and start unscrewing the upper screws of the plastic panel; remove the screws of the grille and disconnect the electrical connector located at the back, as shown in the video.

At this point, remove the front bumper grille and replace it with the new original one; secure it properly with its original screws, reattaching the upper plastic panel.


Posted on 6 November 2026 by ScegliAuto


Related tutorials

Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's learn how to disassemble and replace the windshield washer fluid reservoir on a Volvo XC90. First, open the hood of the vehicle and star…
Replacing Front Camera on Volvo XC90
Replacing Front Camera on Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) The front camera on the Volvo XC90 is located within the automaker's logo and is very easy to remove. First, you need to remove the grille with the e…
How to disassemble the rear light of the Volvo XC90
How to disassemble the rear light of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will show us how to disassemble and replace the rear light and its bulbs on the Volvo XC90. First, let's open the rear hatch of …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos