Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Front bumper

In this tutorial we can see how to remove the front bumper on the Volvo V40, a very simple and quick operation. First, we open the hood, then we locate the pin located on the inner edge of both headlights and remove it. We then unscrew the bolts indicated using a Torx T30 key, remove the headlights themselves and continue by unscrewing the remaining bolts with a Torx T25 key. At this point, all that's left is to remove the various plastic rivets indicated, separate the bumper from the frame, and install any replacement following the reverse procedure.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on the Volvo V40?
How to Remove the Rear Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To remove the rear light on the Volvo V40, open the boot and detach the internal cover of the pillar corresponding to the light to be removed. This w…
Where is the control unit located in the Volvo V40 2015?
Where is the control unit located in the Volvo V40 2015?
Volvo V40 (2012-2019 / MK 2) If you don't know where the control unit of your Volvo V40 second series (year 2015) is located, don't worry because in the following guide we will d…
Replacement of the diesel fuel filter of the Volvo V40 1.6D.
Replacement of the diesel fuel filter of the Volvo V40 1.6D.
Volvo V40 (2012-2019 / MK 2) Below are the instructions necessary to disassemble and replace the diesel filter of the Volvo V40 1.6D, following these simple steps. First, we open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos