Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Tail light

To remove the rear light on the Volvo V40, open the boot and detach the internal cover of the pillar corresponding to the light to be removed. This will allow you to loosen the bolts underneath; next, remove the screws securing the rear bumper located inside the wheel arch corresponding to the light. By doing this, you will be able to detach that part of the bumper and loosen the screws underneath that secure the light from the bottom. By removing these screws and disconnecting the connector, you will be able to completely remove the light.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the diesel filter in the Volvo V40 D3?
How do you replace the diesel filter in the Volvo V40 D3?
Volvo V40 (2012-2019 / MK 2) The diesel filter is a consumable material, comparable to the oil filter, the oil itself, the air filter, and so on. After a certain number of kilome…
How to Remove the Centre Dashboard Panel of the Volvo V40
How to Remove the Centre Dashboard Panel of the Volvo V40
Volvo V40 (2012-2019 / MK 2) To remove the centre dashboard panel of the Volvo V40, pry around the air vents to unscrew the screws underneath. Next, detach the cover located at t…
How to Replace the Front Headlamp Bulb on a Volvo V40
How to Replace the Front Headlamp Bulb on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the front headlamp bulb on a Volvo V40, open the bonnet to access the screws securing the headlamp unit from the top: once these screws ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos