Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheel with the Spare on the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Wheel

See other generations:
Video tutorial

This guide provides step-by-step instructions on how to remove and replace the wheel with the spare on the Fiat Ducato. First, remove the spare wheel from the floor by unscrewing the cable release screw; lift the vehicle and proceed with the wheel replacement by loosening the bolts, as shown in the video.

At this point, tighten the wheel bolts in a criss-cross pattern, then lower the vehicle; reposition the replacement kit and the wheel in the rear compartment, and carry out the repair of the wheel before securing it back on the floor.


Posted on 27 October 2026 by ScegliAuto


Related tutorials

Guide to replacing the wheel with the spare one on the Fiat Ducato Camper
Guide to replacing the wheel with the spare one on the Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) In this guide, we will see the main instructions on how to disassemble and replace the wheel with the spare one on the Fiat Ducato Camper. First of a…
How to Replace the Spare Wheel on the Fiat Ducato
How to Replace the Spare Wheel on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In today's video tutorial, we will see the steps that will allow you to remove and replace the wheel with the spare on the Fiat Ducato, in Camper ver…
How to Change the Wheel on the Fiat Ducato
How to Change the Wheel on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will see the main instructions to remove and replace the wheel with the spare on the Fiat Ducato, including the camper ve…

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos