Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper on a Volvo V40

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Rear bumper

Is the rear bumper of your Volvo V40 broken? Do you want to replace it? Here’s how to remove it from the back of the car. Open the boot lid, unscrew the securing bolts located inside the boot (remove the trim cover). Remove the screws at the bottom of the bumper, then take out the screws located at the sides of the wheel arch liners. Once the bumper is free from any screws, grab it with both hands and pull it away from the bodywork (disconnect the electrical connectors). Fit the new bumper onto the rear bodywork (screw in the securing screws and the boot trim panels).

Updated on 19 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volvo S40 (2004-2012 / MK 2) Let’s look at removing the front bumper on a Volvo S40: lift the bonnet and secure it, raise the car on a jack; using a plastic or metal lever, remov…
Volvo S40 (1995-2004 / MK 1) Today's guide shows you where to find the fuses and how to replace them on the Volvo S40, as well as the V40. First, get inside the car and remove th…
Volvo S40 (2004-2012 / MK 2) The handbrake cable of the Volvo V40 can be replaced by lifting the car with a jack or a lift to gain access to the components located underneath the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos