Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Bonnet Support Strut

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Body

If the front bonnet tends to fall when opened, it means the support strut has lost its ability to hold it up and needs replacing: this is a gas spring specifically calibrated to support the weight of the bonnet and provide the right resistance during closure to prevent it from slamming shut. To replace this strut, open the front bonnet, apply a support rod (a broom handle will do), unclip the safety catches from the ball joints, and remove the old strut; then fit the new one, insert the fastening catches, and remove the temporary support rod.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo S40 (1995-2004 / MK 1) The rear bonnet support struts are actually gas springs that allow you to operate the opening and closing of the bonnet, providing a push during open…
Volvo S40 (1995-2004 / MK 1) It is recommended to perform this operation with the engine cold. Once you have opened the front bonnet and securely propped it up, remove the plasti…
Volvo S40 (1995-2004 / MK 1) Replacing the horn is very simple to perform, thanks to its location: simply open the bonnet to see the two horns fixed at both ends of the grille; t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos