Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : How to replace the oil filter on Volvo S40

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Oil filter
Operation: How to replace the oil filter on Volvo S40

How to replace the oil filter on Volvo S40? Let's see in this video guide how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the rod supplied. We remove the soundproofing panel of the engine, then, with a socket wrench or screwdriver, we remove the locking pins of the metal clamp of the ventilation pipe. We remove the locking pin of the container that contains the oil filter. We take out the worn filter and insert a new one. Finally we reassemble the filter and the attached pieces.


Posted on 22 October 2023 by ScegliAuto



How to change the engine oil and its filter
Volvo S40 (1995-2004 / MK 1) Here is a video showing how to change the engine oil and filter on a Volvo S40 (the same procedure is valid for the Volvo V40). First you need to rem
How to replace the diesel filter of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Let's briefly see the step-by-step instructions that will allow us to disassemble and replace the diesel filter of the Volvo S40. First, we open the
How to replace the cabin filter on a Volvo S40
Volvo S40 (1995-2004 / MK 1) How to replace the cabin filter on a Volvo S40? Let's see the removal. The cabin filter is found at the bottom right of the glovebox. With a plastic

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos