Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter of a Volvo S40

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Cabin air filter

How to replace the cabin filter of a Volvo S40? Start by removing it. The cabin filter is located at the bottom right of the glove compartment. Use a plastic lever to detach the fabric cover located at the bottom right of the dashboard; get a screwdriver and remove the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing. Refit the cap of the filter housing and tighten the screws with the fabric cover. Check the correct installation of the previously mounted parts.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Volvo S40
How to Replace the Cabin Air Filter in a Volvo S40
Volvo S40 (2004-2012 / MK 2) Here are the instructions on how to replace the cabin air filter in your Volvo S40. The steps are simple and are as follows. First, remove the accele…
How to replace the diesel filter of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Let's briefly see the step-by-step instructions that will allow us to disassemble and replace the diesel filter of the Volvo S40. First, we open the …
Where is the fuel filter located in the Volvo S40?
Where is the fuel filter located in the Volvo S40?
Volvo S40 (1995-2004 / MK 1) In this video we can see where the fuel filter is located in the Volvo S40 and how to proceed in case we need to replace it. As shown, the filter is …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos