Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the cover of the central console of the Volvo S40

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the plastic partition of the central console of the Volvo S40. First, we get into the car and start by disassembling and removing the standard radio, disconnecting the electrical wiring located on the back; then we proceed to detach the partition found at the base of the gear lever, subsequently removing the entire cover of the central instrumentation, as shown in the video.

At this point, we proceed with the replacement of the cover, fixing it correctly and reassembling all the other components.


Posted on 16 July 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Volvo S40
How to Replace the Key Battery of the Volvo S40
Volvo S40 (2004-2012 / MK 2) To correctly complete the replacement of the battery located inside the key of your second-generation Volvo S40, follow the procedure described in th…
Where is the Fuse Box on a 2007 Volvo S40?
Where is the Fuse Box on a 2007 Volvo S40?
Volvo S40 (2004-2012 / MK 2) To access the fuse box on your Volvo S40, follow the simple procedure described in this guide. First, ensure you park on a flat surface and completel…
How to Replace the Heater Radiator on a Volvo S40?
How to Replace the Heater Radiator on a Volvo S40?
Volvo S40 (2004-2012 / MK 2) To replace the heater radiator on a Volvo S40, loosen the screws securing all the dashboard and centre tunnel plastics so they can be completely deta…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos