Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter of the Volvo S40

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Diesel fuel filter

Let's briefly see the step-by-step instructions that will allow us to disassemble and replace the diesel filter of the Volvo S40. First, we open the car's engine hood and begin to locate the diesel filter, located on the left; then we disconnect the diesel pipes and the electrical connector of the sensor, as shown in the video. At this point, we unscrew the filter fixing screws to remove it, replacing the cartridge with the new original one; we then reassemble the new filter and make all the various connections, following the video tutorial until the end!

Posted on 25 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the fuel filter located in the Volvo S40?
Where is the fuel filter located in the Volvo S40?
Volvo S40 (1995-2004 / MK 1) In this video we can see where the fuel filter is located in the Volvo S40 and how to proceed in case we need to replace it. As shown, the filter is …
How to Replace the Cabin Filter of a Volvo S40
How to Replace the Cabin Filter of a Volvo S40
Volvo S40 (1995-2004 / MK 1) How to replace the cabin filter of a Volvo S40? Start by removing it. The cabin filter is located at the bottom right of the glove compartment. Use a…
How to Replace the Oil Filter on a Volvo S40
How to Replace the Oil Filter on a Volvo S40
Volvo S40 (2004-2012 / MK 2) How to replace the oil filter on a Volvo S40? Follow this guide: Open the car door and pull up the engine compartment release lever located at the bo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos