Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Filter Located in the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel filter

See other generations:
Video tutorial

In this video, you can see where the fuel filter is located in the Volvo XC90 and how to proceed if you need to replace it. As shown, it is positioned on the underside of the vehicle, right near the tank in front of the right rear wheel. To access it, you will need to lift that side with a jack, taking the necessary safety precautions.

Once you have done this, you can disconnect the two hoses using pliers, unscrew the mounting bolt of the bracket with a 12mm wrench, and install the replacement following the reverse procedure.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box in the Volvo XC90
Where to Find the Fuse Box in the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To locate the fuse box inside your first-generation Volvo XC90 (year 2002-2014), follow these simple steps. First, reach the driver's seat and leave …
Where is the Cabin Air Filter Located in the Volvo XC90?
Where is the Cabin Air Filter Located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this video, you can see where the cabin air filter is located in the Volvo XC90 and how to replace it, a very simple and quick operation. As shown…
How to Reset the Service Light on a Volvo XC90?
How to Reset the Service Light on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) You can clear the Service light from the Volvo XC90 display by inserting the ignition key into the corresponding ignition switch, allowing it to be t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos