Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Waterproofing of a Volvo 66 Door?

Model: Volvo Volvo Various
Part: Car door

Over time, wear and tear inevitably affects the bodywork of a car, especially if it is primarily kept outdoors, despite various treatments against water infiltration and rust performed by the manufacturer. In this regard, here is a tutorial video explaining, in broad terms, how to remedy this type of problem, for example, in doors: you need to remove and replace the rubber seals, as hardened seals will not allow proper adhesion and will let water through. Additionally, it is also useful to adjust the hinges; the doors must close perfectly.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the immobilizer of a Volvo car?
How do you reset the immobilizer of a Volvo car?
Volvo Volvo Various By immobilizer we mean the coded electronic anti-theft system, installed in the vehicle by the manufacturers, including Volvo. Well, when it goes int…
How to disassemble the front door panel of the Volvo 940
How to disassemble the front door panel of the Volvo 940
Volvo Volvo Various These brief instructions will show us how to disassemble and replace the front door panel of the Volvo 940. First, we open the front door of the car …
How to Replace the Remote Battery in a Volvo?
Volvo Volvo Various In this tutorial, you will see how to replace the battery in a Volvo remote, a very simple and quick operation. For this, you will only need a replac…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos