Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Easily Chrome the Front Splitter of the Volvo XC60

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

In this video, we will see how to add a chrome touch to the body of our Volvo XC60: you will only need a small piece of chrome vinyl wrap, which can be easily obtained online for a few dollars, and some very thin adhesive tape. Clean the area well and apply the adhesive tape around the entire perimeter of the area you want to chrome.

Then carefully lay the chrome vinyl over the area, covering the tape completely. If necessary, use a heat gun or a powerful hairdryer to assist.

Once the entire area is covered, carefully pull up the adhesive tape, and this will automatically trim the entire perimeter.


Posted on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Volvo XC60?
How to Replace the Front Headlight on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the front headlight on a Volvo XC60, open the hood to access the screws that secure the headlight at its top. Once these screws are loosen…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
Replacing Cabin Air Filter in Volvo XC60
Replacing Cabin Air Filter in Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In today's tutorial video, you will learn how to easily and quickly remove and replace the cabin air filter in a Volvo XC60. First, locate the filter…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos