Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of a Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
This video is currently unavailable

Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical connectors connected to the bulbs of the rear headlight.

Once you have disconnected all the electrical connectors, unscrew and remove the internal bolts securing the headlight, and you will have freed the rear headlight. Proceed by pulling the headlight out of its housing, then remove it. This completes the removal of the rear headlight of your Volvo XC60.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Volvo XC60
How to disassemble the rear light of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we…
How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the headlight, which are covered by the trunk lid…
How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos