Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front headlights of the Volvo XC60.

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

The steps outlined in this guide will show us how to disassemble and replace the front headlights and their bulbs on the Volvo XC60. First, let's open the hood of the vehicle and start unscrewing all the mounting screws for the headlight that we find at the top; then disconnect the electrical connector for the lights to remove the optical assembly, as shown in the video.

At this point, let's remove the plastic cover to replace the bulbs, making sure to respect the fitting; we can replace either the entire front headlight or just the bulbs, and then reassemble everything, checking that the lights are functioning properly!


Posted on 26 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Volvo XC60?
How to Replace the Front Headlight on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the front headlight on a Volvo XC60, open the hood to access the screws that secure the headlight at its top. Once these screws are loosen…
How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos