Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Headlight

Volvo Xc60 - Headlight

Headlight Volvo Xc60 (2008-2016 / mk 1)

Volvo Xc60 (2008-2016 / MK 1)
Disassembly of the front headlights of the Volvo XC60.
The steps outlined in this guide will show us how to disassemble and replace the front headlights and their bulbs on the Volvo XC60. First, let's open the hood …Read all…
Posted on 26 December 2025 by ScegliAuto
Volvo Xc60 (2008-2016 / MK 1)
How to Replace the Front Headlight on a Volvo XC60?
To replace the front headlight on a Volvo XC60, open the hood to access the screws that secure the headlight at its top. Once these screws are loosened, you …Read all…
Posted on 19 August 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (11) Body (1) Key (20) Timing belt (11) Air conditioner (2) Onboard computer (3) Checks and maintenance (12) Oil pan (1) Dashboard (1) Headlight (2) Tail light (7) Cabin air filter (4) Diesel fuel filter (6) Oil filter (1) Parking brake (1) Grille (1) Headlight bulb (2) Tail light bulb (1) Handle (4) Engine oil (2) Clock (1) Door trim panel (4) Front bumper (1) Rear bumper (1) Car door (1) Fuse box (26) Seat (3) Brake system (1) Side mirror (9) AdBlue warning light (1) Warning light – error code (16) (23) Tire pressure warning light (4) Service warning light (110) Windshield wipers (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos