Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we open the rear door of the car and start removing the side plastic cover, thus accessing the inside of the taillight; then we unscrew the internal fixing screws and disconnect the electrical connector of the bulbs, removing the headlight from the outside, as shown in the video.

At this point, if necessary, we replace the stop bulbs with new ones, reassembling the taillight last and checking its operation!


Posted on 14 July 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the headlight, which are covered by the trunk lid…
How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the corresponding headlight. Once these screws ar…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos