Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Sunglasses Holder in the Volvo V90 (and Many Other Volvo Models)

Model: Volvo V90 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Body

Video tutorial

Let's see how to install the sunglasses holder in a Volvo V90 (but the same system applies to almost all other Volvo models). You can find the accessory on Amazon with the code B09BVP76S1 for $25.32, with free one-day shipping for Prime customers.

We will need to replace the support handle on the driver’s (or passenger's) side with the sunglasses holder. Remove the handle by unscrewing the two screws located under the plastic cover.

Take out the handle and position the sunglasses holder in its place, aligning the holes with those in the headliner. Take the new screws and screw them into the holes; do not over-tighten to avoid damaging the fabric.

Take the screw covers and press them into place over the holes.


Posted on 6 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volvo V90?
How to Reset the Service Light on the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can clear the Service light on the Volvo V90 by pressing and holding the button located at the bottom of the left steering wheel spoke. While hol…
How to Replace the Battery in the Volvo V90?
How to Replace the Battery in the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can replace the battery in the Volvo V90 by opening the rear compartment to access the components inside the engine bay: here you will find the c…
How to disable the passenger airbag in the Volvo V90?
How to disable the passenger airbag in the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can disable the passenger airbag in the Volvo V90 by opening the front passenger door to access the side of the dashboard: in this area, you will…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos