Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. : V90

Volvo V90 - Videoguide

Volvo V90 (2016-2023 / MK 1)
How do you reset the Service light on the Volvo V90?
To reset the Service light on the Volvo V90, you need to turn on the car's instrument panel so that you can access the menu on the instrument panel. You will …read all…
Posted on 6 November 2023 by ScegliAuto
Volvo V90 (2016-2023 / MK 1)
How to reset the maintenance light on the 2019 Volvo V90.
If you want to manually reset the maintenance light that comes on in the instrument panel of your Volvo V90 (year 2019), all you have to do is follow these …read all…
Posted on 4 November 2023 by ScegliAuto
Volvo V90 (2016-2023 / MK 1)
How to remove the rear door panel of the Volvo V90
Let's find out in this short and simple guide how to remove and replace the rear door panel of the Volvo V90. First of all, we open the rear door of our car …read all…
Posted on 10 November 2022 by ScegliAuto
Volvo V90 (2016-2023 / MK 1)
How to replace the key battery on the Volvo V90
If we want to replace the battery of the car remote control key, it is necessary to follow the following steps: take the remote control, slide the rear cover …read all…
Posted on 5 May 2024 by ScegliAuto
Key (1) Checks and maintenance (1) Door panel (1) Instrument cluster (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos